DT Premium Shower Door Bottom Fixed Panel Track 72″ Long

Bottom Track That Locks a Fixed Panel in Place, 72 Inches

This DT Premium Bottom Fixed Panel Track is a 72-inch channel in oil rubbed bronze that secures the bottom edge of a stationary glass panel in a shower enclosure. It carries item number PDKFPT720RB and pairs with the premium header system to hold the fixed side straight and steady.

The fixed panel needs support at the base so it does not shift when the door next to it is used. This track anchors that panel to the curb or floor and keeps the whole enclosure square. Cut the 72-inch length down to fit your panel width.

Key Product Features

• Bottom fixed panel track, 72 inches long
• Oil rubbed bronze finish
• Item number PDKFPT720RB
• Holds the stationary glass panel at its base
• Cuts to length; compares to DK640RB

Installation Notes

Set the track on a clean, level base and seal underneath it to keep water from getting behind the panel. Check that the glass sits fully into the channel before finishing.

Ordering and Shipping

Pairs with the DT premium header system for a complete enclosure. Sign in to see current pricing.