Blog

Compass Series Sliding Shower Kit: A Buyer’s Overview

Compass Series Sliding Shower Kit: Buyer’s Overview
Read with AIAsk your favorite assistant to summarize this article for you.

The Compass sliding shower kit is a coordinated frameless hardware system for an inline enclosure with one stationary panel and one moving door. It combines a rectangular low-profile header with concealed roller carriages, creating a cleaner appearance than systems that display large wheels on the outside of the glass. The sliding configuration also eliminates the outward swing area required by a hinged shower door.

Selecting the Compass Series requires more than comparing its appearance with other sliding systems. The finished opening, glass thickness, panel weight, required fabrication and fixed-panel support must all match the product specifications. This buyer’s overview explains where the system fits, what comes with the kit and what should be confirmed before the glass is ordered.

What Is the Compass Sliding Shower Kit?

The Compass shower kit is designed for a 180-degree inline enclosure. This means the stationary panel and sliding door remain in the same straight line across the shower opening. The moving panel slides behind or alongside the fixed glass rather than swinging outward into the bathroom.

The system uses a rectangular header that contains the roller carriages and establishes the path of the moving door. Its standard 78-inch header can be field-cut according to the approved installation instructions. The fixed and sliding panels overlap to maintain the required movement path and help control water around the meeting area.

Compass Series Specifications

The Compass Series is designed around a defined set of glass and hardware limitations. These specifications should be checked against the measured opening before the project reaches fabrication. A door that exceeds either the approved dimensions or weight can overload the roller carriages and supporting connections.

FeatureCompass Series specification
ConfigurationOne fixed panel and one sliding door
Layout180-degree inline enclosure
Glass thickness3/8-inch tempered glass
Maximum sliding-door weight90 pounds
Standard kit width78 inches, field-cut to approved size
Header profileRectangular low-profile header
Header and hardware material304 stainless steel
Roller systemTwo concealed carriage rollers
Bottom controlMultiway floor guide
Available finishesBrushed stainless, polished stainless, matte black and satin brass
Glass includedNo

The 90-pound rating applies to the finished moving panel rather than the total enclosure. Panel height and width must therefore be used to calculate the completed door weight. The fixed panel has separate support and fabrication requirements that should be reviewed at the same time.

What Comes With the Compass Kit?

The Compass kit includes the primary components required to control and operate the sliding door. These components include the header track, two fixed-panel standoff fittings, two roller carriages, a multiway floor guide, two wall-mount fittings, a pull handle, a sliding-panel stopper, a clear jamb seal and the specified wall-mount fasteners. Keeping these components within one coordinated system helps maintain the intended clearances and operating geometry.

The kit does not include the tempered-glass panels. A U-channel or glass clamps used to secure the bottom or side of the stationary panel are also sold separately. The exact fixed-panel support should be chosen according to panel dimensions, wall and curb conditions, desired appearance and installation requirements.

How the Compass Roller System Works

Unlike a barn-style slider with large exposed wheels, the Compass Series places the roller carriages inside its rectangular header. Each carriage connects to the moving glass through the required mounting holes and travels along the internal track. The concealed design gives the header a clean architectural appearance while the bearings support smooth horizontal movement.

A multiway guide controls the lower part of the sliding panel and keeps it aligned with the fixed glass. The stopper limits the door’s travel, while the jamb seal creates a cushioned closing surface at the wall. These components should be installed in the positions shown by the current product instructions because changing their locations can affect entrance width, overlap and door movement.

Glass Thickness and Fabrication

The Compass sliding shower kit is designed for 3/8-inch, or 10 mm, monolithic tempered glass. Each roller carriage requires two 5/8-inch holes in the moving door, while the fixed-panel standoff fittings require the preparation shown in the current fabrication template. Handle holes and any additional hardware preparation must also be finalized before tempering.

Tempered glass cannot be drilled, trimmed or reshaped after manufacturing. This makes it important to select the hardware system before releasing the glass order. Daltex’s comparison of shower glass thickness explains why 1/4-inch, 3/8-inch and 1/2-inch panels cannot be substituted without confirming hardware compatibility.

Opening Width and Door Weight

The standard Compass header is supplied at 78 inches and can be cut to the approved project length. This does not mean that every opening below 78 inches will automatically provide a practical entrance. The fixed-panel width, sliding-panel width, required overlap and handle clearance still determine how much usable access remains.

The moving door must remain within the maximum recommended weight of 90 pounds. A taller or wider panel weighs more even when the glass thickness remains unchanged. Contractors should calculate the finished panel weight and confirm the fabrication before ordering glass.

Compass Compared With Other Sliding Styles

The Compass Series is best evaluated by comparing its configuration and visual design with other sliding options. A buyer should first decide whether the bathroom needs one moving panel, two bypass panels, exposed rollers or controlled soft-stop movement. Finish should be considered only after these functional requirements have been confirmed.

Sliding styleMain configurationDistinguishing feature
Compass SeriesOne fixed panel and one sliding doorConcealed carriage rollers inside rectangular header
Denali SeriesOne fixed panel and one sliding doorVisible round glass rollers and rectangular header
Clearwater SeriesOne fixed panel and one sliding doorRound header and support for approved 3/8-inch or 1/2-inch glass
Napa SeriesTwo moving bypass panelsAccess can be provided from either side
Pacifica SeriesOne fixed panel and one sliding doorExposed barn-style roller hardware
TideWater SeriesSingle-slider or approved bypass configurationCoordinated soft-stop movement

Daltex’s guide to selecting a sliding hardware kit provides a broader comparison of door movement, track design, glass compatibility and installation requirements. The Compass system is particularly relevant when a buyer wants a clean rectangular header without prominent exposed rollers.

Measuring for the Compass Series

Measurements should be taken after the tile, curb and surrounding wall finishes are complete. Record the opening width at the top, middle and bottom, then check both walls for plumb and the curb for level. The finished dimensions should be evaluated with the manufacturer’s glass and header deductions rather than converted into panel sizes through guesswork.

The entrance side should also be selected before fabrication. Plumbing controls, showerhead direction, toilet position, vanity clearance and access to the handle can influence which panel should remain stationary. Daltex’s measurement guide explains the opening and clearance details that should be recorded before ordering a sliding system.

Who Should Choose the Compass System?

The Compass Series can be a good match for a straight wall-to-wall shower where outward door swing would crowd the bathroom. Its concealed roller carriages may appeal to homeowners and designers who prefer a rectangular architectural profile instead of exposed circular rollers. The single-slider configuration is most suitable when the entrance can remain on one planned side of the enclosure.

It may be less suitable when the bathroom requires bypass access from both sides, 1/2-inch glass, an exposed barn-style appearance or an integrated soft-stop feature. Those requirements may point toward another coordinated sliding system. The decision should be made before glass fabrication because each product uses its own mounting pattern and panel calculations.

Planning a Compass Enclosure in Dallas-Fort Worth

Dallas-Fort Worth projects may include new construction, bathroom remodeling or replacement of an outdated framed enclosure. A field measurement can confirm whether the walls, curb and opening will accommodate the Compass layout and required glass overlap. Structural mounting and waterproofing should also be reviewed before drilling or installing the header and floor guide.

Daltex’s custom shower service can coordinate the selected hardware with properly fabricated glass and the finished opening. This reduces the risk of ordering panels that do not match the roller carriages, fixed-panel fittings or entrance layout.

Final Takeaway

The Compass sliding shower kit provides a frameless single-slider configuration with a rectangular low-profile header and concealed roller carriages. It is designed for 3/8-inch tempered glass, a sliding panel weighing no more than 90 pounds and an inline opening that fits within the approved header dimensions. Buyers should confirm the finished measurements, glass fabrication, fixed-panel support and entrance side before placing the order.

Frequently Asked Questions

1. What glass thickness does the Compass sliding shower kit use?

The Compass Series is designed for 3/8-inch monolithic tempered glass. Another thickness should not be substituted unless the manufacturer provides written approval for the complete configuration.

2. What is the maximum Compass sliding-door weight?

The maximum recommended weight for the moving door is 90 pounds. The finished height and width must be used to calculate the actual panel weight before fabrication.

3. Does the Compass kit include shower glass?

The Compass kit supplies the coordinated sliding hardware, but the fixed and moving glass panels are ordered separately. Their dimensions and mounting holes must follow the current fabrication template.

4. Are U-channels or glass clamps included?

The primary kit does not include the U-channel or clamps used to secure the fixed panel at the curb or wall. Those components should be selected according to the panel dimensions and enclosure design.

5. Can the Compass header be cut to fit?

The stock 78-inch header can be field-cut according to the approved formula and instructions. Cutting the header does not remove the need for proper panel overlap, entrance clearance and weight calculations.

6. Is Compass a bypass sliding shower system?

No, the standard Compass configuration uses one stationary panel and one sliding door. A bypass system uses two moving panels that travel past one another.

Leave a Reply

Your email address will not be published. Required fields are marked *